A multi-functional fan with lamp on a desk; its head tilts to direct airflow while the ring light stays fixed.

HonGa’s Multi-Functional Fan Tilts Airflow While Its Ring Light Stays Fixed

User avatar placeholder
Written by Seth Sebastian

2026-11-19

Hanging a fan over a desk often means choosing between a breeze and a good light. A concept from HonGa Design tries to deliver both from one compact multi-functional fan with lamp that can rest on a table or hang overhead.

The housing is white and square, with deeply rounded corners. Inside the frame sits a circular grille, not the exposed cage of a typical pedestal fan. The concept also comes in orange, mint green, and gray. Orange gives the radial grille a bright, flowerlike look.

A lit band runs between the grille and the outer edge. The light is built into the enclosure, so it stays put when the airflow changes.

Combining airflow and illumination in one body is not new; see how JisuLife Ultra2 pairs cooling with lighting for a similar approach.

The HonGa fan's front view, with the ring light mounted around its central fan housing.
Side profile of the fan head angled upward, demonstrating the tilt adjustment for airflow direction.
Close-up of the tilt mechanism joint connecting the fan head to its base.

Design Details of This Multi-Functional Fan with Lamp

The split matters most when this unit hangs above a work surface. Tilting the round head sends air toward a chair. The lamp keeps pointing down at the desk. You don’t have to aim the whole appliance at your face to catch a breeze.

The folding handle makes these positions possible. Raised, it becomes a hanging point for a clip. Folded behind the body, it props the frame up on a tabletop. The design also suits a wall mount. There is no tall stem or heavy base to fit around. A hanging setup would still need a secure anchor point.

Fan head tilted downward while the ring light remains level at the same height.

After dark, this ring light fan can serve as a bedside light next to the airflow, without needing a second object on the table. A small round remote would keep the controls close when the fan hangs overhead. Switching the lamp would not require reaching up to the housing.

For another take on a light that travels with you at night, see Ryo Matsuoka’s wearable reading light for bed.

The proposed removable front grille addresses a common chore. Dust settles behind the narrow slots of most fans. Direct access to the blades would make cleaning easier than working a cloth through a guard. The concept does not explain how the cover releases. Still, a removable front is a sensible feature for a unit meant to move between positions.

Control panel buttons on the base of the multi-functional fan with lamp.

The brief also covers outdoor use, especially in places where conventional cooling equipment cannot be installed. A hanging version could fill that gap. The proposal, however, gives no figures for weather resistance, power supply, airflow, or noise. It does not describe a working prototype. Its flexibility is a design idea so far, not evidence of how it performs in a summer heat wave.

Ring light switched on, glowing softly around the fan's central opening.

Real use of a desk fan like this would involve trade-offs. You might want air on your face while keeping light off your eyes. Or you might want a breeze once the room goes dark. Separate controls for airflow and light would decide how well the concept handles those moments.

Fan mounted on a flat surface with its ring light facing the camera.
Rear view of the fan showing the stand and ring light mounting arm.
A multi-functional fan with lamp on a desk; its head tilts to direct airflow while the ring light stays fixed.

Via yankodesign.com

Frequently asked questions

Can the fan’s airflow be aimed without moving the lamp?

Yes. Tilting the round head sends air toward a chair, while the lamp keeps pointing down at the desk. The light is built into the enclosure, so it stays put when the airflow changes.

Can this multi-functional fan with lamp hang overhead or mount on a wall?

The fan can rest on a table or hang overhead, using the folding handle as a hanging point for a clip. The article also says the design suits a wall mount, though a hanging setup would still need a secure anchor point.

Does the fan have a removable front grille for easier cleaning?

The concept proposes a removable front grille, which would give direct access to the blades and make dust cleaning easier. The article does not explain how the cover releases.

Does the proposed HonGa fan list its power, noise, or airflow specs?

No. The proposal gives no figures for weather resistance, power supply, airflow, or noise, and it does not describe a working prototype.

Menu