A folded aluminum bedside table showing exposed bolted joints where its panels meet, instead of glued seams.

Frame T-01 Nightstand Swaps Glue for Bolts So Every Part Can Separate

User avatar placeholder
Written by Seth Sebastian

2026-11-17

Frame T-01 is a folded aluminum bedside table built to be taken apart. Designer Connor Niels van Egmond joins folded aluminum sides to a solid oak top with bolts instead of adhesive. The construction stays in view.

If the bolted, separable build appeals to you, FLAT/FORM: furniture built for easy assembly takes a similar approach to lasting, repairable design.

The table comes from Studio van Egmond’s Open Construction, Collection 01. Every part of this piece is designed to separate, and the oak top lifts out in one piece. The exposed hardware is not an afterthought. It defines the look.

Visually, this bedside table design sits between workshop equipment and bedroom furniture. The silver panels look blunt, but large rounded openings cut through the sides and break up the metal. Red outlines trace each opening. The accent is small enough to leave most of the object neutral.

The oak provides contrast. Its grain softens the hard edges of all that metal. The images also show a shallow recess across much of the top, framed by a raised edge. That edge gives a phone or a pair of glasses a defined spot, though it will not keep objects from sliding off.

Storage in This Folded Aluminum Bedside Table

Two open shelves divide the lower frame into a taller upper compartment and a shallower lower one. A single book fits the layout without crowding it. Open storage has a cost, however. Anything placed there stays on view, so charging cables and loose clutter need a plan.

Side view of a folded aluminum bedside table, showing its bolted panel connections.

The listed dimensions are 444 by 348 by 364 millimeters. That converts to about 17.5 by 13.7 by 14.3 inches. Measure your bed height against these figures before buying. Leveling glides are included, a practical detail for a frame that depends on precise fit.

Disassembled aluminum bedside table parts laid out on a surface, with bolts grouped beside them.

According to the designer’s description, a single back panel keeps the frame square. The table is not simply two metal sides with shelves between them. The rear panel carries structural weight. The exploded view supplied with the project shows how the folds, fasteners, and panels relate to one another.

It also routes a lamp cable down inside the back. That keeps cords off the front of the table. It is a practical compromise between exposed construction and everyday household clutter.

Wood-focused readers may also like Hardwood Synth Station Built for Trent Reznor, a furniture build that shows what solid timber can do.

Hands tightening a bolt on a folded aluminum bedside table during assembly.

Separating the oak top, shelves, and side panels of this piece points toward repair or refinishing rather than full replacement. That is a possibility, not a documented service. The supplied information does not mention replacement parts. Still, a damaged top would be a distinct component to address, not something fused into the whole.

I would leave the bolts visible. The red accents depend on the room, but they make the table easy to remember. Frame T-01 asks owners to accept the logic of its furniture design in plain sight, storage included. In return, each piece stays understandable, reachable, and separable.

A folded aluminum bedside table showing exposed bolted joints where its panels meet, instead of glued seams.

H/T yankodesign.com

Frequently asked questions

How is the Frame T-01 nightstand constructed?

The Frame T-01 joins folded aluminum sides to a solid oak top with bolts instead of adhesive. Every part is designed to separate, and the oak top lifts out in one piece.

What are the dimensions of the Frame T-01 bedside table?

The listed dimensions are 444 by 348 by 364 millimeters, which converts to about 17.5 by 13.7 by 14.3 inches. The article advises measuring your bed height against these figures before buying.

Does the Frame T-01 nightstand include leveling glides?

Yes, leveling glides are included with the Frame T-01. The article describes this as a practical detail for a frame that depends on precise fit.

How does the Frame T-01 handle lamp cords?

The exploded view shows a lamp cable routed down inside the back panel. This keeps cords off the front of the table.

Menu