NEEWER RH100B ring light phone holders arranged around a glowing ring light, illuminating a person's face at close range

NEEWER’s RH100B Lights Faces at 8,030 Lux and Mounts Three Phones

User avatar placeholder
Written by Seth Sebastian

2026-11-22

Three smartphones clipped into the RH100B's holders on a ring light stand

Pause any beauty tutorial and look closely at the creator’s eyes. You will likely see two small white circles, the catchlights a ring light leaves behind. Once you spot them, you will see them in nearly every livestream and vlog. Many of those creators rely on ring light phone holders to keep their phones steady in front of the lamp.

NEEWER has released two new ring lights that chase that look in different ways. The RH100B is a 19-inch, 100W studio ring with room for three phones. The RB18B is an 18-inch edge-lit ring with its own battery.

RH100B: Studio output for multi-phone recording

The RH100B is the brighter of the two. NEEWER rates it at 8,030 lux at 0.5 meters (1.6 feet) at 5600K, a daylight-balanced color temperature. Lux measures how much light lands on a surface, and the higher the number, the more light reaches the subject.

Close-up of a ring light's glowing LED panel lighting a face in a dim room

If a compact light suits your mobile setup better than a ring, Godox Litemons SR20R Lighting for Mobile Creators offers a portable alternative built for phone-based content.

In Smart Mode, the 768 LEDs draw up to 100W. At that setting the light produces 8,160 lux at 0.5 meters, with the color temperature set to 4400K. Power of that size generates heat, so NEEWER built in active cooling with two fan modes.

Silent Mode lowers output to 80W and quiets the fan. That trade matters if a microphone sits about a foot from the ring during a podcast or voice-over session. Color temperature adjusts in 100K steps, and brightness moves in 1% increments. Twelve FX scenes, including a candlelight preset, add lighting effects for mood.

Using ring light phone holders on the RH100B

The stand carries three phone holders and three cold shoes. You can mount phones for vertical video, horizontal video, and close-up product shots at the same time. Ring light phone holders like these keep each device steady. Live sellers who run several platforms at once will find that setup useful.

Power connections extend beyond the phones. The USB-C and USB-A ports each deliver 5V/2A to connected devices. An 8V DC output runs a compatible camera through a dummy battery, a battery-shaped adapter that fits where the camera’s battery normally sits.

You control the light from a touch panel with an OLED readout, a 2.4G remote, or the NEEWER app. The older RL-18 offers a comparison point. It is a 55W ring with 240 LEDs, a fixed 5600K output, and a single knob. The RH100B gives you far more control over both light and connected devices.

RB18B: An edge-lit ring that works without a cord

Unlike a standard led ring light, the RB18B takes a different route to soft light. Its 288 LEDs sit along the edges of the ring and shine sideways into a diffusion panel. Edge-lit designs work the same way in many flat-screen TVs and laptops, spreading light before it reaches the viewer.

Ring light mounted on a tripod with a smartphone held in its phone holder

The result is a more evenly lit face with fewer hotspots. The light runs at 45W and produces 3,800 lux at 0.5 meters. NEEWER rates its CRI at 97+. CRI, or color rendering index, measures how accurately a light shows colors compared with natural daylight. The RB18B also carries a TLCI rating of 98+, which measures how consistently a light renders color for television cameras.

A 14.4V, 3500mAh battery, roughly 50Wh, powers the unit. NEEWER rates runtime at about 70 minutes at full power and up to two hours in ECO mode. That makes the light practical for a hotel room, a pop-up booth, or any spot without an outlet.

Charging takes about 100 minutes with a 100W USB-C PD charger when the light is off. The light can also run while plugged in. A 2.4G remote adjusts color and brightness from up to 49 feet (15m) away. A separate wireless shutter remote triggers the phone camera, so a solo creator can adjust the light and take photos without leaving the chair. The stand extends to 69.7 inches (177cm), and the kit packs into a carrying case.

Pricing and which ring fits your setup

The RH100B sells for $209.99 on NEEWER’s US website. It is also listed at Amazon, B&H, Adorama, and Best Buy. The RB18B lists at $299.99, which is $90 more. That difference pays for the built-in battery, the edge-lit panel, and cordless operation.

Side view of a ring light with three phone holders attached to its frame

Both kits include a stand, remotes, and a carrying bag. The RB18B also ships with its wireless shutter remote, which the RH100B does not list.

Solo vloggers who want to check their framing while recording may also be interested in Insta360 Ace Pro 3 Front Screen Leak, which hints at a display built for self-framing.

Choose the RH100B if your setup stays in one room and records several phones at once. Its 100W output and three ring light phone holders suit a small broadcast desk. Choose the RB18B if you shoot on location, work in spaces without outlets, or want softer light with fewer hotspots. A studio that needs both will get the most out of owning one of each.

NEEWER RH100B ring light phone holders arranged around a glowing ring light, illuminating a person's face at close range

Via yankodesign.com

Frequently asked questions

How many phones can the NEEWER RH100B ring light hold?

The NEEWER RH100B stand carries three phone holders and three cold shoes. This lets you mount phones for vertical video, horizontal video, and close-up product shots at the same time.

How long does the NEEWER RB18B run on battery?

The RB18B runs about 70 minutes at full power on its built-in battery. In ECO mode, NEEWER rates its runtime at up to two hours.

How much does the NEEWER RH100B ring light cost?

The RH100B sells for $209.99 on NEEWER’s US website. It is also listed at Amazon, B&H, Adorama, and Best Buy.

What is the difference between Smart Mode and Silent Mode on the RH100B?

Smart Mode lets the 768 LEDs draw up to 100W and produces 8,160 lux at 0.5 meters at 4400K. Silent Mode lowers output to 80W and quiets the cooling fan, which helps when a microphone sits close to the ring during recording.

Menu