An insulated french press mug with its plunger and filter assembly displayed on a light kitchen counter.

Two Press Mugs, Two Plunger Fixes: ESPRO’s P0 Uses Filters, GSI’s MicroLite Uses Its Carafe

User avatar placeholder
Written by Seth Sebastian

2026-11-21

For nearly a century, the French press has needed two parts: a glass carafe to brew in and a separate mug to drink from. Attilio Calimani and Giulio Moneta patented a spring-sealed version in 1929. Faliero Bondanini filed his own design in 1958, and it later reached shoppers as the Chambord. ESPRO and GSI Outdoors asked a simpler question: why not build an insulated french press mug that does both jobs?

Their answers are the ESPRO P0 Ultralight and the GSI MicroLite JavaPress. Both are insulated stainless steel mugs that brew, press, and travel. They handle the central problem of an insulated french press mug in very different ways.

If you care as much about how your coffee gear looks as how it brews, Jaka Kordiš’s tech-inspired coffee machine with artful design offers a striking alternative.

The problem of the plunger

A press needs a plunger, and once the coffee is ready, the plunger has to go somewhere. ESPRO keeps the plunger as a separate part. GSI removes it. Each choice shapes how the mug works, how it cleans, and how it feels to drink from.

ESPRO sells the 16-ounce P0 for $39.95. GSI’s design lets the inner carafe do the pressing, so the drinking vessel is the same piece that pushed the grounds down. Both makers attach conditions to their designs. ESPRO says its 16-ounce mug brews about 12 ounces. GSI warns that the lid may leak if the mug is not kept upright.

ESPRO’s P0 uses two filters on a rod

ESPRO built its reputation on fine filtration, and the P0, an insulated french press mug, follows the same logic as the company’s home presses. Two mesh baskets attach to the end of a rod. ESPRO says the mesh is 9 and 12 times finer than a standard press screen.

Close-up of a stainless steel press mug's plunger and mesh filter screen.

The brewing steps are short. Add coarse grounds and fill to the line inside the mug. Attach the lower lid with the filters in place, then wait about four minutes before pressing. ESPRO says extraction halts once the filters reach the bottom of the mug. That design targets the habit of letting coffee sit in the press and stew. Paper filters work for drinkers who want a cleaner cup, and a tea filter is sold separately.

The P0 measures 2.9 x 2.9 x 9.2 inches (7.4 x 7.4 x 23.4 cm). It has a vacuum-insulated stainless steel body and a looped lid handle that clips onto a backpack. The 210-gram weight in many retail listings comes from ESPRO’s 2018 Kickstarter campaign. That figure covers the bottle and lid only. With the press assembly, ESPRO lists 9.6 ounces, or about 272 grams. Remove the filters and the mug holds its full 16 ounces, so it can serve as a water bottle after the coffee is gone.

GSI’s MicroLite makes the carafe the plunger

GSI’s MicroLite JavaPress, an insulated french press mug, has no rod and no separate filter baskets. Coarse grounds and hot water go into the outer cup, which is made of 18/8 stainless steel. The lid screws onto an inner carafe made of BPA-free polypropylene, and that carafe has a mesh base.

Side view of a double-walled travel press mug with its lid removed.

After about four minutes, the user pushes the carafe down. Coffee passes through the mesh while the grounds stay in the outer cup. The drinker then sips from the carafe through a sealable spout. GSI says the carafe also acts as an extra layer of insulation once pressing is finished. Overall dimensions are 4 x 3 x 8.6 inches (about 10.2 x 7.6 x 21.8 cm).

GSI used a similar idea on its plastic Commuter JavaPress. Its product copy put the concept plainly: “the plunger is the mug.” The MicroLite applies that concept to vacuum-insulated steel. It adds a non-slip foot that GSI says fits most car cup holders, along with a leash attached to the lid.

GSI lists the capacity at 15 fluid ounces. Some retailers list 14.3 fluid ounces (423 ml) but do not say how much brewed coffee the mug yields. The product instructions call for coarse grounds, hand washing, and keeping the mug upright. Reviewers also report that suction can make the carafe hard to pull out at first.

Choosing an insulated french press mug: rod or carafe

The P0 suits drinkers who care most about filtration and plan to carry the mug clipped to a bag. ESPRO describes its double-lock lid as leak-proof. The MicroLite suits people who want to skip the plunger rod, fit the mug into a cup holder, and can keep the mug upright.

Insulated press mug with its inner carafe removed, showing the brewing chamber and plunger.

Cleanup differs between the two. The P0 requires taking apart two filters and rinsing the rod. The MicroLite requires emptying the grounds from the outer cup and rinsing the carafe. Both need about four minutes of steeping, so neither shortens the wait.

Brewing on the go also suits campsites and tailgates, and RetroWave radio and BioLite stove tailgating shows how portable kit can make an outdoor setup feel like home.

Pricing also separates them. ESPRO lists the P0 at $39.95, the same price it announced at launch. It comes in colors from Meteorite Black to Frost Wisteria. GSI’s store lists the MicroLite at $30.99, down from $44.95. At the time of review, both MicroLite colors showed as sold out, and REI marked the Sand version as discontinued.

Other gadgets, such as the FinalPress V2, brew inside a mug the drinker already owns. The P0 and the MicroLite take the opposite route. They build the press into the mug, and the choice comes down to whether you want a rod and filters or a single carafe that does the pressing.

An insulated french press mug with its plunger and filter assembly displayed on a light kitchen counter.

Via yankodesign.com

Frequently asked questions

How does the ESPRO P0 insulated french press mug actually press coffee?

The ESPRO P0 uses two mesh filter baskets attached to the end of a rod. You add coarse grounds, attach the lower lid with the filters in place, wait about four minutes, and then press.

How does the GSI MicroLite JavaPress press coffee without a separate plunger?

The MicroLite’s inner carafe has a mesh base and acts as the plunger. After about four minutes, you push the carafe down, letting coffee pass through the mesh while the grounds stay in the outer cup.

How much coffee does the ESPRO P0 brew in its 16-ounce mug?

ESPRO says its 16-ounce P0 mug brews about 12 ounces of coffee. The article does not say how much the MicroLite yields.

How much does the GSI MicroLite JavaPress cost at GSI’s store?

GSI’s store lists the MicroLite JavaPress at $30.99, down from $44.95. The ESPRO P0 is priced at $39.95.

Menu