A modular scaffolding pavilion beside the Mandalika racetrack, its exposed steel frame wrapped in translucent polycarbonate panels.

AT-LARS Wraps Reusable Steel Scaffolding in Translucent Panels to Glow at Mandalika

User avatar placeholder
Written by Seth Sebastian

2026-11-19

Four months was all it took to build a two-story gallery at the Pertamina Mandalika International Circuit in Indonesia. AT-LARS completed the 1,400-square-meter Pertamina MotoGP Experience Gallery in 2024, a modular pavilion built with a reusable steel system.

The steel scaffolding of this structure does two jobs. It carries the building’s loads, and it also forms the visible scaffolding architecture. The frame is designed to run for years and can be reconfigured, extended or moved. The result echoes the industrial look of the circuit grandstands beside it.

The approach is built around demountable parts. Fewer materials go to waste, and less labor is needed on site. The building is meant to be reused, not preserved as a fixed monument.

Steel scaffolding pavilion standing at the Mandalika racetrack, seen from the outside.
all images ©Muhamad Putera Wicaksana unless stated otherwise

Reconfigurable pavilions like this one have a long experimental lineage. Michael Jantzen’s self-arranging dynamic pavilion architecture shows how a structure can change form over time, which is worth a look for the same reuse-first thinking.

A split plan around the Speed Box

The plan centers on an elongated upper volume the team calls the “Speed Box.” The design studio split it into two parallel gallery wings. A central open-air foyer and circulation spine runs between them.

Exposed modular steel scaffolding forms the pavilion's structural frame and visible architectural design.
a modular steel scaffolding system acts as both the structural skeleton and architectural expression

A ground-level base holds retail space, administrative offices and storage. Above it, elevated walkways, gathering terraces and circuit viewing platforms link the two upper volumes. Visitors can look out over the track from these decks.

Sloped ramps run along the east and west facades. They give a continuous route between floors that does not depend on stairs.

Translucent, lightly tinted polycarbonate panels wrap the steel frame in horizontal bands.
translucent and lightly tinted polycarbonate panels wrap the steel frame in horizontal bands

The two wings have different jobs. The South Gallery is a flexible hall for product launches and community events. The North Gallery is Indonesia‘s first official Mandalika MotoGP™ Gallery, and it houses motorsport memorabilia and installations.

A translucent skin for the modular scaffolding pavilion that glows after dark

Lightly tinted, translucent polycarbonate panels wrap the steel frame in horizontal bands. Daylight passes through the skin and spreads softly into the galleries. After dark, the building lights up from within.

Close view of bolted scaffolding joints and the panel mounting system holding polycarbonate.
detail view showing the bolted scaffolding joints and panelized polycarbonate mounting system

Light and climate can do a lot of the work in temporary architecture. Robotic Earth Bricks Forming a Microclimate Pavilion takes a different material route to a similarly short-lived, experimental build.

The cladding is prefabricated, and it hangs on the same reusable frame that carries the structure. Envelope and skeleton work as one system, which suits the pace of motorsport and event schedules.

Exposed scaffolding structure beside racetrack grandstands, matching their industrial look.
the industrial aesthetic of the exposed scaffolding aligns with the surrounding racetrack grandstands

Conventional museum architecture is usually built for fixed permanence. This building was designed to be taken apart, rebuilt and reused, and that choice is the most unusual thing about it.

Demountable scaffolding components that can be added to or moved elsewhere with little waste.
demountable components allow the pavilion to be expanded, or relocated with minimal material waste
Long, elongated ramps linking the pavilion's two floors in a continuous, accessible route.
elongated ramps provide continuous, accessible circulation between the two floors
Open gallery interior with flexible space set up for exhibitions and community gatherings.
the gallery provides an open, adaptable space for exhibitions and community events
Elevated walkways and viewing terraces overlooking the racing circuit, with outdoor gathering areas.
elevated walkways and viewing terraces overlook the circuit, integrating outdoor gathering areas into the museum route
Tinted polycarbonate cladding filters daylight, casting soft, diffused light inside the pavilion.
tinted polycarbonate cladding filters natural sunlight during the day, casting diffused light
Pavilion at night, interior lights glowing through translucent polycarbonate panels beside the track.
at night, interior lighting turns the translucent polycarbonate envelope into a glowing landmark beside the track
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
Interior view of the pavilion during construction, showing the steel scaffolding framework in progress.
construction interior | image ©Fernanda Fattahalim site plan floor plan 1F floor plan 2F roof plan north elevation – west elevation section B-B’ – section C-C’ section D-D’ section detai A-A’
A modular scaffolding pavilion beside the Mandalika racetrack, its exposed steel frame wrapped in translucent polycarbonate panels.

Via designboom.com

Frequently asked questions

How big is the Pertamina MotoGP Experience Gallery at Mandalika?

The Pertamina MotoGP Experience Gallery is a 1,400-square-meter, two-story modular pavilion at the Pertamina Mandalika International Circuit in Indonesia. AT-LARS completed it in 2024 after about four months of construction.

Why is the steel scaffolding of the Mandalika gallery designed to be reusable?

The steel frame is built from demountable parts and is designed to run for years, so it can be reconfigured, extended or moved. The building is meant to be reused rather than preserved as a fixed monument, which means less material waste and less labor on site.

What is the translucent skin on the Mandalika gallery made of and how does it look at night?

Lightly tinted, translucent polycarbonate panels wrap the steel frame in horizontal bands. Daylight passes through them to light the galleries softly, and after dark the building lights up from within.

What are the two gallery wings in the Pertamina MotoGP Experience Gallery used for?

The South Gallery is a flexible hall for product launches and community events. The North Gallery is Indonesia’s first official Mandalika MotoGP Gallery and houses motorsport memorabilia and installations.

Menu