Anyone who has mailed a CAD file to a machine shop knows the cycle. A quote arrives, then a revised quote, then weeks of waiting for a part that shows a design flaw the moment it reaches the bench. Rownd Precision wants to shorten that loop with a desktop cnc mill that cuts metal in the studio.
The Rownd 5X is a fully enclosed desktop cnc mill built for simultaneous five-axis machining. The workpiece tilts and rotates while the cutter works, so the machine can shape curved parts in aluminum, brass and engineering plastics with fewer setups. Rownd aims the machine at studios, labs, classrooms and small workshops.
Metal work at this scale also shows up in furniture studios, where designers test how far sheet and rod can bend. Riveted Furniture Pushing the Limits of Metalwork shows what hand-joined steel can do when fabrication constraints drive the form.
Rownd’s earlier product was a desktop CNC lathe. Its 2023 Kickstarter campaign for the lathe was delivered, though after repeated delays. Hackster reports that the lathe shipped after repeated delays, which matters for anyone weighing a backer tier on the 5X.
Five axes working together
A conventional three-axis mill moves its cutter along X, Y and Z. The 5X adds two rotary axes beneath the part for 5-axis machining. The C axis rotates a full 360 degrees, and the A axis tilts from -45 to +90 degrees, according to Rownd’s specification page.
The machine offers three working modes. Simultaneous five-axis cutting uses the full range of motion. The 3+2 mode locks the part at a fixed angle and then machines it like a three-axis mill. Plain three-axis mode offers a 265 × 240 × 180 mm work area.
Five-axis and 3+2 jobs limit the part to a cylinder 200 mm across and 180 mm tall. Rectangular stock must fit entirely inside that envelope. Tool length and fixturing can reduce that clearance.
The controller handles rotational tool center point compensation, or RTCP, which keeps the cutter tip on its programmed path as the part turns. The controller is based on LinuxCNC, and Rownd forked the open-source project for its own use, per Hackster. Surface finish still depends on tooling, toolpaths and cutting conditions.
Chassis, spindle and accuracy
The body of this desktop cnc mill is a single-piece cast aluminum chassis. Fewer bolted joints mean fewer places for the frame to loosen or flex under load.

The rotary table, called a trunnion, is supported at both ends. Motion runs on roller linear guides and ball screws, per Rownd’s specification page. Rownd rates positioning repeatability at ±0.02 mm.
The spindle is rated at 2.2 kW with a top speed of 24,000 rpm. Hackster gives the speed range as 2,000 to 24,000 rpm. The sources disagree on cooling. Rownd’s specification page lists a water-cooled spindle. Rownd’s specification page lists the spindle as water-cooled. Buyers should confirm the configuration before ordering.
Mist cooling directs coolant at the cutter, according to Rownd. The company lists aluminum alloys 6061 and 7075, brass, copper, Delrin (POM), PEEK and composites as machinable materials.
Tool changer, software and touchscreen
The 10-tool automatic tool changer is available only on the Pro. It uses ISO20 holders and has a 12-second average tool change, according to Hackster.

A 13.3-inch touchscreen handles setup, monitoring and manual control.
Rownd lists compatibility with Fusion 360, SolidCAM, Mastercam and Siemens NX, along with any CAM package that outputs standard G-code. The company provides free post-processors that translate toolpaths into commands for this specific machine. GizmoCrowd estimates renewal at about $100 a year and says commercial use needs confirmation from Rownd.
Power, footprint and who a desktop cnc mill suits
Rownd’s specification page lists an input of 230 Vac at 50 Hz or 208 to 240 Vac at 60 Hz, with an estimated total draw of 2.8 kW. GizmoCrowd reports a requirement of 110 to 220 VAC single-phase. The two figures do not match, so confirm the supply with Rownd before buying.

The base model weighs 105 kg and the Pro weighs 120 kg.

GizmoCrowd suits this desktop cnc mill to makers who design in CAD, hobby machinists, small firms and schools. It is not a load-and-press-start machine. Stock, workholding, tools and cutting parameters still require programming.
For readers who want to see how aluminum behaves once it leaves the machine, Claire Lavabre’s Raw Aluminum Posto Lamp for HAY offers a minimalist example where the unfinished metal is the point.
The Kickstarter campaign is the sales channel for the 5X. The campaign has raised over $775,000. The Super Early Bird 5X costs $5,999 and is limited to 50 units. The Pro with automatic tool changer package costs $7,999. Shipping is planned for June 2027.
A desktop cnc mill that tilts and spins a block of aluminum does not replace an experienced machinist. It does shorten the distance between a CAD revision and a physical part on the bench. Whether that trade pays off depends on the campaign delivering on its schedule.

H/T yankodesign.com
Frequently asked questions
How much does the Rownd 5X desktop CNC mill cost?
The Super Early Bird 5X costs $5,999 and is limited to 50 units. The Pro package with the automatic tool changer costs $7,999, and shipping is planned for June 2027.
What materials can the Rownd 5X mill machine?
Rownd lists aluminum alloys 6061 and 7075, brass, copper, Delrin (POM), PEEK, and composites as machinable materials. Surface finish still depends on tooling, toolpaths, and cutting conditions.
What work area does Rownd 5X offer for five-axis jobs?
Five-axis and 3+2 jobs are limited to a cylinder 200 mm across and 180 mm tall. Plain three-axis mode offers a 265 × 240 × 180 mm work area, and rectangular stock must fit entirely inside the applicable envelope.
Which Rownd 5X model includes the automatic tool changer?
The 10-tool automatic tool changer is available only on the Pro model. According to Hackster, it uses ISO20 holders and has a 12-second average tool change.
More in
Technology
All Technology


