Future lunar settlers may not need to haul building materials from Earth. They could print lunar dust bricks from the dust already covering the Moon.
Researchers at the University of Arkansas have shown that simulated lunar dust can be 3D printed into small, interlocking blocks. The process uses heat, not glue or cement, to fuse the grains together. Wan Shou, who leads the mechanical engineering work, and Cole McCallum, then an undergraduate, ran the experiments. Their findings were published in the journal npj Advanced Manufacturing.
The approach could shrink the cargo load for future Moon missions. Rather than shipping cement and other moon building materials into space, crews could make structural parts from local regolith, the loose layer of crushed rock and fine mineral dust that blankets the lunar surface.

Why lunar dust is harder than it looks
Regolith resembles soil on Earth, but it differs in important ways. It contains no organic matter. Billions of years of impacts from asteroids, micrometeorites and other debris have ground the surface rock into jagged particles.
Dust and rock on other worlds carry their own geological clues, much like the terrain Arkansas researchers are studying on the Moon. Mars Rover Uncovers Mysterious Patterns on Mount Sharp offers a look at how surface features on another planet tell their own story.

On the Moon, there is no wind or flowing water to wear those edges smooth. NASA has compared the abrasive grains to tiny shards of glass. The particles can also pick up an electrical charge and cling to surfaces.
Apollo crews saw the problem firsthand in the 1960s and early 1970s. The dust damaged spacesuit materials and clogged mechanical parts. Engineers planning new missions still need ways to keep it out of machinery, where its sharp edges can wear down moving components.

Printing lunar dust bricks with the regolith alone
The Arkansas team worked with Lunar Highlands Regolith Simulant, known as LHS-1. The Exolith Lab at the University of Central Florida developed the material, and Space Resource Technologies supplies it commercially. It is made from Earth minerals chosen to match the composition and grain texture of lunar highland soil, based on Apollo samples.
The team used laser powder bed fusion to build the blocks. A thin layer of powder is spread across a platform. A focused laser traces the shape and heats the particles until they fuse. The platform then drops, a fresh layer is added, and the cycle repeats until the part is complete.

Earlier lunar construction tests often mixed the regolith with polymer binders or cement. The Arkansas method avoids those additives. Heat bonds the grains to one another through sintering, a process that joins particles without melting the entire material into a liquid.
“There’s nothing else it’s binding to,” McCallum said. “The regolith powder is binding to itself.”

Cross and H shapes that lock together
The team borrowed an idea from traditional mortise-and-tenon woodworking. It designed two complementary geometries. One is a cross-shaped piece that acts as a projecting connector. The other is an H-shaped module with a recessed profile that receives it.
When the pieces fit together, they interlock without fasteners. The researchers have built small wall sections and shielding units from lunar dust bricks in the two shapes. Because each block can be printed separately, a settlement could make replacements in batches and rearrange structures as its needs change. Printing one enclosure at a time with a large machine offers less flexibility.

The lunar dust bricks are still experimental, and they are only a few centimeters wide. They have porous surfaces, and the connections need refinement. The researchers say the bricks are weaker than versions that use binders.
“These structures we’re making can be self-supported,” McCallum said. “But I would be hesitant to say our process could be used for something that’s supporting other loads at this moment yet.”

Shou’s group says the process will need testing in microgravity and vacuum before it can serve as a practical construction method. Its mechanical performance also needs to improve before the bricks can carry real loads.
Could sunlight do the heating?
A laser is not the only option the team has in mind. The researchers are exploring whether concentrated sunlight could fuse the powder instead. In their paper, they suggest that Fresnel lenses or parabolic mirrors could focus solar energy onto the regolith and reach temperatures high enough to sinter it.

Earlier solar sintering experiments have hardened simulated lunar soil with focused light. The Arkansas prototypes, however, were made with a laser. If sunlight works, construction equipment could draw on two resources already present on the Moon, regolith and sunlight, to print lunar dust bricks.
The European Space Agency has pursued a related idea. In 2023, its PAVER project used a powerful laser to melt simulated lunar dust into a glassy surface for roads and landing pads. The goal was to stop rovers and landing craft from kicking up abrasive dust. The team also produced interlocking triangular paving pieces and proposed a large Fresnel lens as a sunlight-based replacement for the laser on the Moon.
Snap-together geometry like the cross and H modules has a playful cousin in toy building sets. LEGO’s Venetian Neighborhood Set With 5,682 Bricks shows how far interlocking bricks can stretch when the design is pushed to a large scale.
Collaborators at the University of Houston and Tampere University also contributed to the Arkansas work. The study was led by Shou, with McCallum as first author.
A student’s head start
McCallum began working in Shou’s lab early in his undergraduate studies. He graduated from the university.
He has moved on from additive manufacturing, but he says the lab taught him how research works.
“It helps you refine and overcome all the problems you have as a researcher,” he said. “There are a lot of mistakes that I made the first time through. It was really nice to have a head start on everyone else and make those mistakes early.” The Arkansas work points to a practical path for lunar construction. Lunar dust, a laser or sunlight, and a stack of printed layers could eventually yield homes, shelters and walls on the Moon itself.

Via designboom.com
Frequently asked questions
How do researchers turn lunar dust into bricks without glue or cement?
The Arkansas team uses heat to fuse the grains together, a process called sintering that joins particles without melting the whole material into a liquid. Laser powder bed fusion is used to build the blocks layer by layer, so no binders or additives are needed. The regolith powder binds only to itself.
Why is lunar dust difficult to work with?
Lunar regolith has no organic matter and was ground by billions of years of impacts into jagged particles. With no wind or flowing water to smooth them, the grains are abrasive, and NASA has compared them to tiny shards of glass. The dust can also pick up an electrical charge and cling to surfaces, and it damaged spacesuits and clogged machinery during Apollo missions.
How do the lunar dust bricks fit together?
The team borrowed the idea from traditional mortise-and-tenon woodworking and designed a cross-shaped connector and an H-shaped module with a recessed profile that receives it. The pieces interlock without fasteners. Each block can be printed separately, so settlements could make replacements and rearrange structures as needs change.
Are lunar dust bricks ready for use on the Moon?
No, the bricks are still experimental and only a few centimeters wide, with porous surfaces and connections that need refinement. The researchers say they are weaker than versions using binders and are not yet ready to support other loads. The process will also need testing in microgravity and vacuum before it can be a practical construction method.
More in
Technology
All Technology



More like this

Charlie Firth's Luminous Sculptures Fuse 3D Printing with Memphis Movement Aesthetics

Berlin Startup 3D-Prints Lamps Using Garden Stones

Hollow Clock V Hides Its Motor and Gears Behind a Slim Display Ring

Olivia Colman Enlists Wētā Workshop to Bring Wicker Husband Alexander Skarsgård to Life

Harvard Unveils Pioneering Wool Tiles Redefining Sustainable Building at Oslo Architecture Triennale
