Some lamps hide their hardware. Others tilt, stretch, or dissolve into the room. Five past winners of the AZ Awards, including the liiu lighting sculpture, show how far designers have pushed the light fixture.
The AZ Awards have run for 16 editions, and each jury has judged by its own standards. The core criteria have stayed the same: aesthetics, function, creativity, and environmental and social responsibility. The AZ Awards archive shows how designers have answered the problems of their time.
In lighting, that experimentation has taken many forms. Some designers made sources almost invisible. Others built flexible systems that reshape a room. The five fixtures below reach their goals through very different materials and mechanisms.
Liiu lighting sculpture by Vantot (2026)
Dutch studio VANTOT designed Liiu for Luceplan. The liiu lighting sculpture combines electrified cables with slender illuminators, and it began with a specific constraint. Partners Esther Jongsma and Sam van Gurp needed a large installation hung from a protected monument that could not bear much weight.
Their answer uses counterweights to keep the cables taut. The result is a liiu lighting sculpture four meters wide that weighs just 40 kilograms. Luceplan’s advanced configurator invites further experimentation, so Liiu’s most inventive applications may still be waiting to be discovered.

AZ Awards 2026 juror Jonathan Garnett was impressed. “It’s incredible and intricate,” he said. “I found myself asking, ‘How could I use it?’ It has such a physical quality once it’s assembled.”
Rificolona by Miniforms (2025)
Italian studio E-ggs starts with a familiar object: the paper lantern. Rificolona takes its name from a centuries-old Florentine festival of paper lanterns. Its shade is rotationally molded from recycled polyethylene mixed with a small amount of white powder.
Recycled materials can also give a light fixture its character, as seen in Rificolona’s molded shade. For another take on sustainable lighting, see 3D-printed lamps made from recycled materials, which turn waste into illumination.
That material gives the shade a semi-transparent, textured surface. It spreads a warm, atmospheric glow. The shade hangs from a black cable and tilts from vertical to horizontal, stopping at any angle in between.

AZ Awards 2025 juror Bahar Ghaemi saw both the sculptural form and the practical use. “We would definitely spec this in one of our projects,” she said.
Plusminus by Vibia (2023)
Stefan Diez designed Plusminus for Vibia, and it treats the fixture as a flexible kit rather than a fixed object. A conductive polyester belt carries copper wire. Six clip-on luminaire fittings attach to it, ranging from cones to spheres.
The fittings cover everything from focused task light to soft mood lighting. The fabric strip can be pulled taut or left loose across a room. Additional components fix the belt to ceilings or walls, so installation does not depend on existing wiring.

The jury admired the technical range, but the playful character won them over. “There’s a sense of fun that softens the strong conceptual ideas behind it,” said AZ Awards 2023 juror Thom Fougere.
Anima by Davide Groppi (2022)
Davide Groppi and Giorgio Rava created Anima, a floor lamp with almost no visible body. It stands nearly one meter tall on a thin carbon-fiber stem. The stem disappears, and the light it throws onto the wall takes center stage.
The fixture reduces the hardware so far that the light itself becomes the object, a lighting sculpture in its own right. Its soft, ambient glow fills the space behind it. The lamp both vanishes and makes a strong impression in any room.
If Anima’s disappearing act appeals to you, a more sculptural approach to lighting is worth a look. Topo Lamp’s mid-century sculptural styling shows how a fixture can make its own bold statement.

AZ Awards 2022 juror Gabriele Chiave described it in strong terms. “This very poetic lamp really represents the ultimate idea of light, which is ethereal and invisible,” he said. “It celebrates in a very romantic way the dematerialization of the hardware and the light output.” Almost five years after its introduction, the design still stands apart.
Noctambule by Flos (2020)
Several years before Anima reached the market, Konstantin Grcic was working on a different kind of disappearing act. That work became Noctambule, a modular glass lighting system for Flos. When switched off, the system nearly vanishes.
Blown-glass columns appear to float between rings of light. LED strips sit inside die-cast aluminum junctures, hidden from view. The modules combine into suspended or floor-standing layouts, and some reach 3.2 meters tall.

AZ Awards 2020 juror Luca Nichetto praised the piece for its “great combination of traditional handicraft with modern lighting technology.” That pairing explains much of its appeal. The glass keeps the craft visible, while the LEDs stay out of sight.
Taken together, these five winners treat the fixture as something to reshape. Each one asks how little hardware a room needs. The answers range from the 40-kilogram liiu lighting sculpture to a lamp that is barely there at all. Discover more award-winning lighting designs at awards.azuremagazine.com.

Sources & Links
Frequently asked questions
How heavy is the Liiu lighting sculpture?
The Liiu lighting sculpture weighs just 40 kilograms and is four meters wide. Its designers used counterweights to keep the electrified cables taut, which suited a protected monument that could not bear much weight.
What is the Rificolona lamp shade made of?
The Rificolona shade is rotationally molded from recycled polyethylene mixed with a small amount of white powder. This gives it a semi-transparent, textured surface that spreads a warm, atmospheric glow.
Does Plusminus need existing wiring to be installed?
No, Plusminus does not depend on existing wiring. Additional components fix its conductive polyester belt to ceilings or walls, so it can be installed without relying on the room’s current wiring.
What materials make up the Noctambule lighting system?
Noctambule is a modular glass lighting system for Flos, designed by Konstantin Grcic. It uses blown-glass columns, with LED strips hidden inside die-cast aluminum junctures.
More in



