The mega tamagotchi manga reader, an oversized egg-shaped device, shows manga pages on its touchscreen.

Oversized Tamagotchi Egg Swaps Pet Care for Pages of Manga on a Touchscreen

User avatar placeholder
Written by Seth Sebastian

2026-11-21

External media is paused. Its provider may receive your IP address and use cookies when loaded.

A Tamagotchi is a plastic egg you carry in a pocket. This oversized reader swaps that pocket-sized egg for a shell big enough to hold a full-color 4.3-inch touchscreen. It is a working DIY project, not an official Bandai product, and the painted enclosure gives digital comics an unexpected home.

The shell started as a trace of a Tamagotchi outline in Fusion 360. The designer enlarged that outline around the display and electronics. A jagged gold border frames the screen, while blue paint and scattered gold flecks give the body a night-sky look. Visible print lines and brushwork make the finish clearly handmade.

The design credit goes to Arnov Sharma.

If the egg-shaped gadget idea appeals to you, Filament’s interactive egg teaches money skills through play shows how a tech-filled egg can also be a learning toy.

Oversized egg-shaped Tamagotchi device with a touchscreen displaying a manga page

Three turquoise buttons sit below the screen, echoing the original toy. They are decorative, glued into the housing, and pressing them does nothing. All navigation happens on the capacitive touchscreen through taps and swipes, the same way a phone handles an e-book. The look is faithful, but the toy’s most recognizable interaction is gone.

The software keeps more of that personality. At startup, a pixel-art egg hatches with chiptune audio, then gives way to a gallery of manga covers. Choose a title, swipe through its pages, and the reader remembers where you stopped. Nothing in the hatching sequence asks you to feed or clean up after a pet.

Close view of a manga page shown on the device's touchscreen
Hand holding the oversized egg-shaped device with its screen turned on
Side view of the oversized Tamagotchi-style egg showing its buttons and casing

Inside the mega tamagotchi manga reader

The brain is a Waveshare ESP32-P4-WIFI6-Touch-LCD-4.3 development board, supplied by the manufacturer. Its 480 by 800 pixel IPS LCD is a conventional color panel, not an E Ink screen, despite the device’s reading role. A speaker handles the startup sound.

The ESP32-P4 is a dual-core RISC-V processor running at up to 400 MHz. An ESP32-C6 companion chip adds Wi-Fi 6 and Bluetooth 5. In this diy tamagotchi, the builder chose the board for its processing power, since the device needed to handle a graphical interface, animation, audio, touch input and media playback.

On this device, an SD card stores the manga collection locally. Reading a chapter does not require a download over Wi-Fi, so the basic reading routine works offline.

Manga panels displayed across the device's touchscreen in a page-turning layout

Loading the library on it takes preparation. A companion Python tool converts PDF files into JPEG pages sized for the display. You copy those pages to the SD card. The reader cannot open PDFs directly.

Device resting on a table beside a stack of manga volumes

Readers who want less screen clutter around their books might compare this touchscreen approach with Meadow, a compact phone built to minimize distractions, which takes a similar stripped-back view of connectivity.

The reader offers a black-and-white contrast mode alongside color. An on-screen toggle lets you switch treatments page by page.

Close-up of the touchscreen showing a black and white manga page

The PLA enclosure splits into a main body and a rear lid held by six screws. A rechargeable lithium-ion cell, rated at 3.7 volts and 2000 mAh, sits beside the display. A USB-C port handles charging, and a rocker power switch sits at the back. Hot glue holds the screen in place, so swapping components takes more effort than removing the six screws would suggest.

Person reading manga on the oversized egg-shaped device indoors

Where the oversized egg falls short

A bigger shell does not turn this build into a paperback page. Small dialogue will still require squinting, and the rounded body takes up more room than the display itself. This device fits a bag, not a keychain. Its gold-speckled paint would scratch quickly against keys.

Back of the egg-shaped device showing its casing and controls
Oversized Tamagotchi egg device compared in size with a hand
The mega tamagotchi manga reader, an oversized egg-shaped device, shows manga pages on its touchscreen.

H/T yankodesign.com

Frequently asked questions

Is this oversized Tamagotchi reader an official Bandai product?

No, it is a working DIY project and not an official Bandai product. The painted enclosure is meant to give digital comics an unexpected home.

What board powers the oversized Tamagotchi manga reader?

The reader uses a Waveshare ESP32-P4-WIFI6-Touch-LCD-4.3 development board, supplied by the manufacturer. The builder chose it for its processing power because the device had to handle the interface, animation, audio, touch input, and media playback.

Can the Tamagotchi manga reader read comics without Wi-Fi?

Yes, the basic reading routine works offline. An SD card stores the manga collection locally, so reading a chapter does not require a Wi-Fi download.

Can the reader open PDF files directly without conversion?

No, the reader cannot open PDFs directly. A companion Python tool first converts PDF files into JPEG pages sized for the display, and those pages are copied to the SD card.

Menu