A one-piece 3d printed children's shoe with ribbed, flexible walls that widen to fit growing feet

Fits Shoe Expands Five Sizes as Children’s Feet Grow, Printed in One Piece

User avatar placeholder
Written by Seth Sebastian

2026-11-22

Children tend to outgrow shoes long before the soles wear out. Fits, a 3d printed children’s shoe, is built to stretch with the foot instead of being replaced.

The idea started as a 2022 concept from footwear designer Daniel Winter, the designer behind the project. The refined model now grows across five full sizes, and it has finished wear testing.

How the 3d printed children’s shoe expands

Fits uses a method called integral articulation. The term describes a sole made of linked rims along its perimeter, which is the outer edge where the shoe meets the ground.

Printed children's shoe shown in a product photograph for the Fits article
all images ©Daniel Winter, Fits

When pressure from the foot pushes down, those rims press apart and roll outward. The gaps between them widen, adding volume. The segments never separate, so the sole stays one connected structure throughout.

The same 3D printing approach is also being used for tougher jobs, where printed structures must flex under heavy loads. 3D printed airless wheels for off-road vehicles shows how the method handles rough terrain.

Soft flexible 3D printed children's shoe shown expanding across five full sizes
3D printed from a soft flexible filament, the children’s shoe expands across five full sizes

To make it, Winter adjusted standard 3D printers to extrude a soft filament rated 75A, a common hardness scale for flexible materials. The sole and upper print together as one piece, making it a mono-material shoe. The finished shoe can be recycled at the end of its life.

According to the Fits website, the 3d printed footwear range covers US sizes 4c to 9c. Each shoe leaves room for the toes to spread as the child moves.

Single continuous printed shoe with sole and upper formed as one piece
the sole and upper are printed simultaneously as a single continuous, mono-material structure

An adult sole for uneven feet

The designer has applied the same principle to an adult sole prototype. This version covers a three-size range and aims to fit the shape of the individual foot rather than only its length.

The segments are smaller here, and they sit closer together. That layout lets separate zones of the sole open on their own. The result can follow the lopsided outline most feet have, where one side differs from the other. A knit upper is planned for the adult model.

Linked perimeter sections of a children's shoe flexing outward to widen the interior
through integral articulation, linked perimeter sections flex and roll outward to widen interior volume

Expanding products that adapt as their owners change are a growing trend in design. Modular cat tower that expands with your family applies the same idea of growth-ready design to pet furniture.

The company is based in Christchurch, New Zealand, according to its website. If the adult prototype performs as planned, the same mechanism could move from managing growth to managing fit, which would be a larger change for the category.

Segmented shoe wall unfolding, with ribs separating while the sole stays connected
as the segmented wall unfolds, the spaces between individual ribs open without breaking the continuity of the upper or sole
Close view of a one-piece shoe made from one material, without glue or stitching
mono-material fabrication eliminates glues and multi-polymer stitching
Close view of ribbed shoe perimeter flexing outward with tread pattern intact
the articulating perimeter ribs flex outward without distorting the tread pattern
Daniel Winter holds two mint green children's shoes with orange details before leafy green foliage
daniel winter holds up two mint green fits children’s shoes with orange details against a leafy green background
Daniel Winter holds up a white adult sole prototype against a leafy green background
daniel winter holds up a white fits adult sole prototype against a leafy green background
A one-piece 3d printed children's shoe with ribbed, flexible walls that widen to fit growing feet

Via designboom.com

Frequently asked questions

What is integral articulation in the Fits children’s shoe?

Integral articulation is a method in which the Fits shoe’s sole is made of linked rims along its perimeter. When the foot presses down, these rims press apart and roll outward, widening the gaps between them and adding volume, while the segments never separate.

How many sizes does the Fits children’s shoe expand across?

The refined Fits model grows across five full sizes. According to the Fits website, its 3D printed footwear range covers US sizes 4c to 9c.

Can the Fits 3D printed shoe be recycled at end of life?

Yes, the finished shoe can be recycled at the end of its life. The sole and upper print together as one piece, making it a mono-material shoe.

What material is the Fits shoe printed with?

The shoe is printed with a soft filament rated 75A, a common hardness scale for flexible materials. Designer Daniel Winter adjusted standard 3D printers to extrude this filament.

Menu