A sanrivatti one hypercar leans into a corner in a rider-style posture, with the driver positioned low and forward.

Sanrivatti’s Apex Position Swaps the Driver’s Seat for a Superbike Posture

User avatar placeholder
Written by Seth Sebastian

2026-11-16

Single-seat hypercars almost always point back to the racetrack. The Sanrivatti ONE makes a different argument. This sanrivatti one hypercar asks the driver to lie face-forward in the middle of the car, much as a superbike rider does.

Most one-person supercar projects come from motorsport. The Gordon Murray-designed Rocket for the Light Car Company, the BAC Mono, the McMurtry Spéirling Pure and the limited-run Ferrari Monza SP1 all fit that pattern. Buyers rarely get a seat beside them to share the experience.

For a real two-wheeler built with the same rider-first spirit, see Handcrafted (RED)800 Motorbike with 821cc Ducati Engine, a bespoke build around a powerful V-twin.

The Sanrivatti ONE hypercar viewed from the side, showing its low, forward-set seating position.
Sanrivatti ONE Hypercar

Sanrivatti is a Dutch startup founded by a man from Uruguay, according to evo. Founder and CEO Santiago Sánchez Rivero leads the project. The company previewed the ONE earlier in the year, and it unveiled a show car at its headquarters in the Netherlands on November 13, 2026.

The ONE is a mid-engined, rear-wheel-drive car with a carbon-fibre monocoque. Its powerplant is a naturally aspirated 5.5-litre V10 from Judd, targeting 800 hp at 9,000 rpm and 700 Nm (516 lb-ft) of torque. A six-speed Hewland sequential gearbox sends the power to the rear axle.

The weight target is 1,100 kg dry, or 2,425 lb. Sanrivatti puts the power-to-weight ratio at roughly 727 hp per tonne and projects a top speed of 205 mph (330 km/h). These are development targets, not verified results.

Front three-quarter view of the Sanrivatti ONE hypercar's bodywork and front wheels.
Sanrivatti ONE Hypercar

Design of the sanrivatti one hypercar

Robin van Tilborg is the lead designer. His sketches draw on a peregrine falcon in a high-speed dive and on a fighter jet. The car has a wedge-shaped silhouette, a single-piece canopy that is integrated into the body, and air intakes that channel air through the bodywork.

A vertical fin rises behind the driver, and a large wing wraps around the rear of the car. The design has drawn comparisons to the ItalDesign Giugiaro Machimoto concept from 1986. That concept seated up to nine people on two benches, so the ONE’s layout is hardly typical.

Rear three-quarter view of the Sanrivatti ONE hypercar showing its rear body and wheels.
Sanrivatti ONE Hypercar

The Apex Position

The ONE’s defining feature is its proprietary Apex Position. The driver sits centrally and further forward, astride the car’s spine, with the feet set back. Cabin and dash layout have not been shown.

Sánchez Rivero describes the goal in plain terms. “When we started Sanrivatti, we didn’t want to create another hypercar that simply followed the established formula with more power and more technology,” he said. “We wanted to question something more fundamental: what it actually feels like to drive.”

Sanrivatti ONE hypercar shown in a rider-style apex posture, leaning into a turn.
(Image credit: Sanrivatti)

For this car, Sanrivatti’s main claim concerns visibility. In virtual testing at Corner Three of Silverstone Circuit, the company reports that the Apex Position showed an average of 3.2 times more visible racing surface than ten benchmark hypercars and track cars. The comparison used simulators, not timed laps.

Evo notes that whether this translates into faster lap times remains to be determined. The company has not yet shown a production interior, so the cabin’s practical details, including ergonomics and comfort, remain unknown.

Digital render of the Sanrivatti ONE hypercar with its cockpit and body lines visible.
Sanrivatti ONE Hypercar render

Still a concept

This hypercar is a show car, not a running prototype. Sanrivatti has built a proof-of-concept model and runs real and virtual simulators. Sanrivatti has not announced pricing, production numbers or delivery dates.

If the Apex Position’s unusual proportions intrigue you, compare it with Porsche Mission S Concept Mixing Heritage and Minimalism, another concept car that balances old cues with modern restraint.

The name may also need work. Autoevolution points out that the Mercedes-AMG One already uses the name, so Sanrivatti may revisit it before production. For updates, the company’s website is Sanrivatti.com.

Sanrivatti ONE hypercar in a motion-style pose, with the rider-like seating position emphasized.
(Image credit: Sanrivatti)

The car will be judged on lap times and on how drivers handle the posture at speed, not on renderings alone. Until Sanrivatti publishes test data, the Apex Position remains a bold idea with a single simulation behind it.

A sanrivatti one hypercar leans into a corner in a rider-style posture, with the driver positioned low and forward.

H/T wallpaper.com

Frequently asked questions

What engine does the Sanrivatti ONE hypercar use?

The ONE uses a naturally aspirated 5.5-litre V10 from Judd. Sanrivatti targets 800 hp at 9,000 rpm and 700 Nm (516 lb-ft) of torque, though these are development targets rather than verified results.

How much does the Sanrivatti ONE weigh?

Sanrivatti’s weight target for the ONE is 1,100 kg dry, or 2,425 lb. The company puts its power-to-weight ratio at roughly 727 hp per tonne based on these targets.

What is the Apex Position in the Sanrivatti ONE?

The Apex Position is the ONE’s proprietary seating layout, in which the driver sits centrally and further forward, astride the car’s spine, with the feet set back. It is modeled on the riding posture of a superbike rider.

Has Sanrivatti announced pricing or a delivery date for the ONE?

No, Sanrivatti has not announced pricing, production numbers, or delivery dates. The ONE is currently a show car backed by a proof-of-concept model rather than a running prototype.

Menu